Systemès de chargement
A higher level of quality and efficiency create higher demands on medical personnel and equipment. In spite of new technology, some work still overwhelms today ́s medical personnel. Remeda’s products provide simpler and more effective solutions for work in operating departments and central sterilization departments.
The Remeda loading systems have been developed in order to create a more effective handling of goods at the hospital, without creating strain on the personnel. Remeda has a large variety of different loading and transport solutions. From manual loading systems using fixed height trolleys and racks or basket feeders to multi loading systems where the Multiloader loads a line of sterilizers from one or several conveyors.
Remeda’s automatic loaders are intended for use in the central sterilization department to facilitate loading and unloading of baskets and racks. Combined with Remeda’s transport trolleys, the automatic loader becomes an excellent tool to simplify and make work more efficient in the central sterilization department.
The Remeda automatic loaders are designed for loading and unloading of baskets and racks. It fits to an autoclave with a chamber opening width of 660-700mm and the control of the loader is integrated with the control of the sterilizer.
Different combination with manual loading and automatic unloading can be done. Remeda has a wide range of loading and transport trolleys optimized for use with Remeda automatic loaders.
| Numéro de référence | Prof. chambre stérilisateur mm (pouces) | Type de charge |
|---|---|---|
| 100 41-00 | 600-700 (23,6-27,6) | Panier |
| 100 41-01 | 900-1000 (35,4-39,4) | Panier |
| 100 41-02 | 1200-1300 (47,2-51,2) | Panier |
| 100 41-03 | 1600-1700 (63,0-66,9) | Panier |
| 100 41-04 | 1900-2000 (74,8-78,7) | Panier |
| 100 41-10 | 600-700 (23,6-27,6) | Rack |
| 100 41-11 | 900-1000 (35,4-39,4) | Rack |
| 100 41-12 | 1200-1300 (47,2-51,2) | Rack |
| 100 41-13 | 1600-1700 (63,0-66,9) | Rack |
| 100 41-14 | 1900-2000 (74,8-78,7) | Rack |
Le chargeur de sol Remeda est conçu pour le chargement et le déchargement des stérilisateurs posés au sol ou encastrés dans une fosse.
Il existe plusieurs versions de chargeurs de sol, selon le type de stérilisateurs et de chariots de transport utilisés, ainsi que l'installation des stérilisateurs.
Le chargeur est conçu pour charger ou décharger de grands racks sur roulettes et est construit pour s'adapter aux racks standard déjà utilisés au service de stérilisation centrale.
Dual Loader
Le chargeur Remeda Dual est conçu pour le chargement et le déchargement de paniers ou de racks sur des stérilisateurs à porte simple.
Le chargeur Dual possède un côté de chargement et un côté de déchargement. Le chargeur Dual est également disponible en version Multi pour les stérilisateurs à porte simple. La commande du chargeur communique avec celle du stérilisateur.
Remeda propose une large gamme de chariots de chargement et de transport optimisés pour une utilisation avec le chargeur Dual.
The Remeda Multi loader is a fully automated system which uses single point loading and unloading of baskets or racks. It is designed to minimize the personnels handling of the goods and can work in a closed working environment without the need of supervison.
The Multi loader’s shuttle collect goods from one or several conveyors and load it into the sterilizer when it is available.
The integrated control system control the number of cycles of each sterilizer and select the sterilizer with the least amount of cycles. This is done to make sure that all the sterilizers are used the same amount.
The control of the loader communicate with the control of the sterilizer.
The Remeda Multi loader is suited for sterilization department where there is a space restriction or when the sterilisers are situated in a closed space.
Different combination with multi loading and automatic unloading can be done. Remeda has a wide range of loading and transport trolley´s optimised for use with the Multi loader.
Stacker
The stacker is specifically designed to streamline the stacking and destacking of baskets within a CSSD, significantly reducing manual handling and physical strain on staff. By automating heavy and repetitive movements, it improves workplace ergonomics while increasing overall efficiency.
Seamlessly connected to conveyors both before and after the unit, the stacker integrates effortlessly into existing workflows. It is typically implemented as part of a fully automated system, ensuring a smooth, continuous flow of materials throughout the process.
With its reliable performance and smart integration capabilities, the stacker not only enhances productivity but also contributes to a safer and more efficient working environment.
200 52 Transport Trolley
The Remeda transport trolley is used together with the automatic loader on conveyors in the central sterilization department. The height of the trolley can be adjusted so that loading and unloading can be carried out at suitable working height. Thanks to the unique lifting system, the trolley is exceptionally easy to clean. The height adjustment is electric and controlled by an easy operated control placed on the handle. The trolley is delivered with a charger for the battery. The handle is mounted on the bottom part of the trolley, and stays at normal height. The top of the trolley is designed for transportation of baskets and racks without wheels. The trolley is manufactured in stainless steel with a frame in stainless steel profile piping. Equipped with four castors with diameter 125mm, of which 2 with brakes and 2 with direction locking. The trolley is available in a fixed height version as well.
| Reference number |
Réglage de la hauteur mm |
Réglage de la hauteur |
|---|---|---|
| 200 52-01 | 585-885 | 4 DIN |
| 200 52-11 | 600-950 | 4 DIN |
| 200 52-21 | 600-950 | 4 DIN |
| 200 53-02 | 585-885 | 6 ISO ou 6 SPRI |
| 200 53-12 | 600-950 | 6 ISO ou 6 SPRI |
| 200 53-22 | 600-950 | 6 ISO ou 6 SPRI |
| 200 52-02 | 585-885 | 6 DIN |
| 200 52-12 | 600-950 | 6 DIN |
| 200 52-22 | 600-950 | 6 DIN |
| 200 52-03 | 585-885 | 8 DIN ou 9 ISO ou 9 SPRI |
| 200 52-13 | 600-950 | 8 DIN ou 9 ISO ou 9 SPRI |
| 200 52-23 | 600-950 | 8 DIN ou 9 ISO ou 9 SPRI |
| 201 52-01 | 800-900 | 4 DIN |
| 201 52-11 | 900-1000 | 4 DIN |
| 201 52-02 | 800-900 | 6 DIN |
| 201 52-12 | 900-1000 | 6 DIN |
| 201 52-03 | 800-900 | 8 DIN ou 9 ISO ou 9 SPRI |
| 201 52-13 | 900-1000 | 8 DIN ou 9 ISO ou 9 SPRI |
| Referencia | Réglage de la hauteur mm | Prof. chambre mm |
|---|---|---|
| 201 80-01 | 800-900 | 600-700 |
| 201 80-11 | 900-1000 | 600-700 |
| 201 80-02 | 800-900 | 900-1000 |
| 201 80-12 | 900-1000 | 900-1000 |
| 201 80-03 | 800-900 | 1200-1300 |
| 201 80-13 | 900-1000 | 1200-1300 |
| 201 80-04 | 800-900 | 1600-1700 |
| 201 80-14 | 900-1000 | 1600-1700 |
| Referencia | Hauteur fixe mm | Prof. chambre mm |
|---|---|---|
| 200 80-01 | 560-860 | 600-700 |
| 200 80-11 | 610-960 | 600-700 |
| 200 80-21 | 660-1060 | 600-700 |
| 200 80-02 | 560-860 | 900-1000 |
| 200 80-12 | 610-960 | 900-1000 |
| 200 80-22 | 660-1060 | 900-1000 |
| 200 80-03 | 560-860 | 1200-1300 |
| 200 80-13 | 610-960 | 1200-1300 |
| 200 80-23 | 660-1060 | 1200-1300 |
| 200 80-04 | 560-860 | 1600-1700 |
| 200 80-14 | 610-960 | 1600-1700 |
| 200 80-24 | 660-1060 | 1600-1700 |
Le chariot à chargement semi-automatique (SAL) Remeda est conçu pour charger et décharger la chambre du stérilisateur d'une simple pression sur un bouton. Sur le dessus du chariot peut être placé soit un rack à étagères, soit une plateforme de transfert, selon le type de matériel à manipuler. La hauteur du chariot peut être réglée afin que le chargement et le déchargement s'effectuent à une hauteur de travail adaptée. Grâce au système de levage unique, le chariot est exceptionnellement facile à nettoyer. Le réglage de la hauteur est électrique et commandé par une commande facile d'utilisation placée sur la poignée. La poignée est montée sur la partie inférieure du chariot et reste à hauteur normale pendant l'utilisation. La partie supérieure est équipée d'un système de guidage et de verrouillage permettant de bloquer le chariot sur les rails de la chambre de l'autoclave. Le chariot est fabriqué en acier inoxydable avec un cadre en tubes profilés en acier inoxydable. Équipé de quatre roulettes de diamètre 125 mm, dont 2 avec freins et 2 avec verrouillage directionnel. Le chariot est conçu pour les autoclaves dont l'ouverture de chambre carrée mesure environ 660 à 700 mm de large. Le chariot est également disponible en version à hauteur fixe.
| Referencia | Hauteur fixe mm | Prof. chambre mm |
|---|---|---|
| 200 80-02-SAL | 550-850 | 900-1000 |
| 200 80-12-SAL | 600-950 | 900-1000 |
| 200 80-03-SAL | 550-850 | 1200-1300 |
| 200 80-13-SAL | 600-950 | 1200-1300 |
| 200 80-04-SAL | 550-850 | 1600-1700 |
| 200 80-14-SAL | 600-950 | 1600-1700 |
200 88 Loading Trolley
The Remeda loading trolley is designed to load and unload sterilizers in the sterilization and operating departments. The trolley is used together with a transfer platform that is rolled into the chamber. The platform rest on the chamber floor.
The height of the trolley can be adjusted so that loading/ unloading can be carried out at suitable working height. Thanks to the unique lifting system, the trolley is exceptionally easy to clean. The height adjustment is electric and controlled by an easy operated control placed on the handle. The trolley is delivered with a charger cable for the battery. The handle is mounted on the top part of the trolley. The trolley is manufactured in stainless steel with a frame in stainless steel profile piping. Equipped with four castors with diameter 100mm, of which 2 with brakes and 2 with direction locking.
The trolley is designed for autoclaves with square chamber opening width of 460mm. The loading height to be specified on order.
| Reference number |
Réglage de la hauteur mm (inch) |
Prof. chambre mm (inch) |
Plate-forme |
|---|---|---|---|
| 100 88-01 | 570-870 (22,4-34,3) | 660 (26,0) | 100 88-21 |
| 100 88-02 | 550-850 (21,7-33,5) | 960 (37,8) | 100 88-22 |
| 100 88-11 | 600-950 (23,6-37,4) | 660 (26,0) | 100 88-21 |
| 100 88-12 | 600-950 (23,6-37,4) | 960 (37,8) | 100 88-22 |
| Numéro de référence | Prof. chambre mm | Pour rail de chambre |
|---|---|---|
| 100 61-01 | 600-700 (23,6-27,6) | 100 61-51 |
| 100 61-02 | 900-1000 (35,4-39,4) | 100 61-52 |
| 100 61-03 | 1200-1300 (47,2-51,2) | 100 61-53 |
| 100 61-04 | 1600-1700 (63,0-66,9) | 100 61-54 |
200 64 / 200 65 Rack d’étagères
The Remeda shelf rack is used together with a trolley or automatic loader to carry the goods through the sterilizers. The shelf rack
allows goods to be pre-loaded at the packing table and is manufactured in stainless steel, where baskets, containers or packs can be placed. The shelf rack is used in a circulating flow, and is returned to the clean, loading side after the sterilization process.
200 64 / 200 65 Transfer Platform
The Remeda transfer platform is used together with a trolley or automatic loader to carry the goods through the sterilizers.
The transfer platform allows goods to be pre-loaded at the packing table and is manufactured in stainless steel, where baskets, containers or packs can be placed. The transfer platform is used in a circulating flow, and is returned to the clean, loading side after the sterilization process.
| Reference number |
Longitud mm (pouce) | Breite mm (pouce) | Pour type de chariot |
|---|---|---|---|
| 200 64-11 | 630 (24,8) | 608 (23,9) | 200 80 |
| 200 64-12 | 930 (36,6) | 608 (23,9) | 200 80 |
| 200 64-13 | 1260 (49,6) | 608 (23,9) | 200 80 |
| 200 65-11 | 630 (24,8) | 608 (23,9) | 200 52 |
| 200 65-12 | 930 (36,6) | 608 (23,9) | 200 52 |
| 200 65-13 | 1260 (49,6) | 608 (23,9) | 200 52 |
The transfer trolley is designed to facilitate the handling of goods within the central sterilization department. It allows personnel to easily transport items throughout the workspace, improving efficiency during daily operations.
| Reference number |
Table top mm (inch) |
Height mm (inch) |
La description |
|---|---|---|---|
| H19757 | 600×400 (23,6×15,7) | 800 (31,5) | Hauteur fixe |
| H12985 | 600×400 (23,6×15,7) | 900 (35,4) | Hauteur fixe |
| H37777 | 1070×570 (42,1×22,4) | 900 (35,4) | Hauteur fixe |
The transfer trolley is designed for efficient handling of goods within the central sterilization department. Featuring electric height adjustment, it allows personnel to easily transport items and position them at the ideal working and lifting height. This enhances ergonomics, reduces physical strain, and supports a smoother workflow throughout the department.
| Numéro de référence | Dim. du plateau mm (pouce) | Hauteur mm (pouce) | Capacité kg/lb | La description |
|---|---|---|---|---|
| 10005-01 | 600×400 (23,6×15,7) | 650-1450 (25,5-57,1) |
15/33 | Réglable en hauteur |
| 10005-02 | 700×500 (27,6×19,7) | 650-1450 (25,5-57,1) |
15/33 | Réglable en hauteur |
| 10005-03 | 800×600 (31,5×23,6) | 650-1450 (255-57,1) |
15/33 | Réglable en hauteur |
Pass Through Hatch
The Remeda Pass through hatch is crafted from durable stainless steel and fitted with glass doors. The pass through hatch ensures safe and efficient transfer of goods between sterile and clean areas. Its electrically operated doors open one at a time, minimizing cross-contamination and streamlining the movement of loading cars.
Designed for flexibility, the pass through hatch can be customized to integrate with automatic loading systems and conveyors. Its height can be adjusted to accomodate various loading equipment heights, enhancing compatibility across your workflow.
Available in multiple sizes, it supports both large sterilizer loading cars and smaller racks for washer disinfectors. The robust stainless steel backplate on the door frame ensures a tight seal against the wall, effectively minimizing airflow and maintaining environmental integrity.
Packbord
Höj- och sänkbart packbord. Bordsskivan är tillverkad i 12 mm vit högtryckslaminat, stativet är i rostfritt utförande.
Max belastning är 100 kg.
| Ref. nr | Bordsskiva stl. mm | Höjdreglering mm | Beskrivning |
|---|---|---|---|
| 100 10-21 | 1400×750 | 755-1255 | Höj- och sänkbar |
| 100 10-22 | 1600×750 | 755-1255 | Höj- och sänkbar |
| 100 10-23 | 1800×750 | 755-1255 | Höj- och sänkbar |
| 100 10-24 | 2000×750 | 755-1255 | Höj- och sänkbar |
Höj- och sänkbart packbord. Bordsskivan är tillverkad i 12 mm vit högtryckslaminat, stativet är i rostfritt utförande.
Max belastning är 100 kg.
| Ref. nr | Bordsskiva stl. mm | Höjdreglering mm | Beskrivning |
|---|---|---|---|
| 100 10-31 | 1400×750 | 755-1255 | Höj- och sänkbar |
| 100 10-32 | 1600×750 | 755-1255 | Höj- och sänkbar |
| 100 10-33 | 1800×750 | 755-1255 | Höj- och sänkbar |
| 100 10-34 | 2000×750 | 755-1255 | Höj- och sänkbar |
Broshures
English
Télécharger le PDFFrançais
Télécharger le PDFDeutsch
Télécharger le PDFEspañol
Télécharger le PDF
